Removing The Ups; Lifting The Bracket - IBM 4800-741 Hardware Service Manual

Removing the UPS

Note: This procedure applies to the wide machine feature only.
1. Remove the front bezel by referring to Figure 17 on page 29.
2. Unplug and remove all of the power cords and the serial cable, if installed.
Figure 46. Power supply housing bracket
3. See Figure 46. Untighten the screw ( R ) on the UPS lock.
Figure 47. Lifting the bracket
4. Slide the bracket to the right and the lift it out of the expansion housing.
56
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
R
R
Updated July 14, 2008