Advertisement
Installation
English
Notes
Installation with the mounting
• Check all connections and systems before final
sleeve
installation.
1. Insert the mounting sleeve into the
• Do not use unauthorized parts. The use of
unauthorized parts may cause malfunctions.
dashboard.
• Consult with your dealer if installation requires
• When installing in a shallow space, use a
drilling of holes or other modifications of the
supplied mounting sleeve. If there is enough
vehicle.
space behind the unit, use factory supplied
• Do not install this unit where:
mounting sleeve.
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result of
2. Secure the mounting sleeve by
a sudden stop.
• Install this unit away from hot places such as near
using a screwdriver to bend the
the heater outlet.
metal tabs (90°) into place.
• Optimum performance is obtained when the unit
is installed at an angle of less than 60°.
Dashboard
60°
Mounting sleeve
Installation
English
3. Install the unit as illustrated.
Removing the Unit
• Use commercially available parts when
1. Press the detach button to release
installing.
the front panel.
Nut
• Refer to the Operation Manual about how to
release the front panel.
Firewall or
metal support
2. Insert the supplied extraction keys
into both sides of the unit until
Metal strap
Screw
they click into place.
3. Pull the unit out of the dashboard.
Screw (M4 8)
• Make sure that the unit is installed securely
in place. Unstable installation may cause this
Fastening the front panel
unit to malfunction, such as sound skip.
If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
Screw
Installation
English
Installing the microphone
2. Install the microphone clip on the
sun visor.
(MVH-P8300BT only)
• With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
Installation notes
recognition rate.)
Install the microphone in a position and
Microphone clip
orientation that will enable it to pick up the
voice of the person operating the system.
CAUTION
It is extremely dangerous to allow the microphone
lead to become wound around the steering
column or gear shift. Be sure to install the unit in
such a way that it will not obstruct driving.
When installing the microphone
on the sun visor
Clamp
1. Install the microphone on the
Use separately sold
clamps to secure the
microphone clip.
lead where necessary
inside the vehicle.
Microphone
When installing the microphone
Microphone clip
on the steering column
1. Install the microphone on the
microphone clip.
Microphone
Microphone base
Microphone clip
Fit the microphone
lead into the
groove.
• Microphone can be installed without using
microphone clip. In this case, detach the
microphone base from the microphone
clip. To detach the microphone base from
microphone clip, slide the microphone base.
Installation
English
2. Install the microphone clip on the
steering column.
Double-sided tape
Install the microphone clip on the
rear side of the steering column.
Clamp
Use separately sold
clamps to secure
the lead where
necessary inside the
vehicle.
Adjusting the microphone
angle
The microphone angle can be adjusted.
Advertisement
