Frontgate Everett Assembly Instructions

Pre-assembly
1) Please read all instructions carefully and completely before beginning assembly.
2) Save all packing materials until assembly is completed to avoid accidentally
discarding any parts or hardware.
3) Two person assembly required.
Parts list:
.
Step1 Remove all the components from their boxes and place them on a carpeted or scratch-free surface.
Place the Table Top (B) upside down; put the Bottom Base (A) upside down on the Table Top, align the pre-drilled holes,
secure with the spring washers (F), flat washers (E) and screws (D) using the enclosed Allen wrench (C).
Step2. Equally attach the Table Base on the bottom ring of the Bottom Base and then upright the assembled unit.
Everett Coffee Table
ASSEMBLY INSTRUCTIONS: