Charging
Charge the battery connecting to the computer with the USB cable.
1
Press the < button to turn off the camcorder.
The power lamp goes out.
2
Connect the camcorder to a computer.
Camcorder's LCD monitor will turn off when the USB cable is connected.
This occurs during battery charging or when connected to a PC.
Charge lamp
Charging time
When the charging is finished, disconnect the camcorder from the computer.
NOTE
•
Charging is not possible while the camcorder is turned on.
•
Make sure that the computer is turned on during charging.
•
The camcorder is not charged when it is shipped. Charge the camcorder before using it for
the first time.
•
If there is a trouble in charging, the charge lamp/warning lamp blinks in green. Connect the
camcorder to the computer again.
Battery Indicator
8
Blinking
Charge Lamp
Power Lamp
To Computer
turns on: Charging
goes out: Charging finished
approx. 180 minutes
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.
Empty
The camcorder will turn off. Recharge the battery immediately.
< Button
USB Cable
USB Connector
9