Control A Far-End Camera - Cisco Board Series User Manual

Camera control

Control a far-end camera

1 1
During a call, tap the screen to get the
call controls. Then tap the Participants
button.
3
Adjust the remote camera's tilt, pan, and
zoom with the camera control buttons.
Tap anywhere outside the controls when
you're done.
15513.07 Cisco Board and Desk Series User Guide MAY 2025
All contents © 2025 Cisco Systems, Inc. All rights reserved
2 2
Tap the participant whose camera you
want to control, then tap Control camera.
About far-end cameras
When you're in a video call where
one or more of the other devices
have a remotely controllable
camera, you can control those
cameras from your own device.
If the far-end device has activated
Speaker mode where the camera
follows the active speaker or is
using Best View, you can't control
the camera remotely.
You don't have remote access to
any camera presets.
67