Control Your Camera Manually - Cisco Board Series User Manual

Camera control

Control your camera manually

1
In or out of call, open the control panel
and tap the Camera button. Or, tap the
selfview image and then tap the Camera
button there.
Select Manual under Camera mode.
15513.07 Cisco Board and Desk Series User Guide MAY 2025
All contents © 2025 Cisco Systems, Inc. All rights reserved
2
Use the controls to pan, tilt, and zoom the
camera. Tap anywhere else on the screen
to exit.
About manual camera control
Desk devices automatically frame you with
Best view. However, in some situations on
any device you might want to adjust the
framing.
You can control the zoom, pan, and tilt of the
camera manually, in or out of a call.
(Board Series) When you adjust the camera
manually, if you like the view you might
want to save it to use again. To create and
save custom views with predefined zoom
and camera direction, you need to use a
touch controller, connected to your Board. If
you've got a touch controller connected to
your Board, see the RoomOS 11.20 Room
Series User Guide, for details.
65