Access And Adjust The Selfview In And Out Of Call; About Selfview - Cisco Board Series User Manual

Camera control

Access and adjust the selfview in and out of call

1
Make sure your camera is on. During a
call, tap the screen to open the selfview
up on top of the call. Then tap the button
on the selfview's right corner and change
the visibility to Hide, Show in call, or
Always show.
In or out of call, open the control panel
and tap the Selfview button to get the
same settings.
15513.07 Cisco Board and Desk Series User Guide MAY 2025
All contents © 2025 Cisco Systems, Inc. All rights reserved
2
Even when you select to hide it, your
selfview will still appear to you in the
control panel with the same options
available there.

About selfview

The selfview shows what others
see from your device. You can use
it to confirm that they see what
you want them to see.
You can see, adjust, and move your
selfview around the screen both in
and out of call.
To check your selfview at any time,
open the control panel. As long
as your camera is open/on, you'll
see your selfview there and can
expand it to Fullscreen if you want.
To exit fullscreen, open the control
panel and tap Fullscreen again.
Tap the Selfview button in the
control panel to set visibility for
your selfview to Hide, Show in call,
or Always show.
62