Share Content With Miracast; About Miracast - Cisco Board Series User Manual

Content sharing
Share content with Miracast®
On Windows laptop
1. On your laptop press Windows+K, or click the Action
Center icon and then click Connect. Windows will scan for
Miracast receivers.
2. Click on the Board or Desk Series device you want to cast
to. A PIN will appear on the device's screen.
3. Enter the PIN on your laptop and click Connect.
•
When in call, an auto share pop up appears, showing a
five-second countdown before the sharing starts. During
the countdown you can cancel the share.
•
Outside a call, the sharing starts immediately.
4. Sharing starts.
On Android phone
1. On a Samsung device, open the Settings menu and select
Smart View or Dex. Note that the naming is different on
other Android devices.
2. Click on the Board or Desk Series device you want to cast
to. A PIN will appear on the device's screen.
3. Enter the PIN on your Android device.
4. Tap Connect.
•
When in call, an auto share pop up appears, showing a
five-second countdown before the sharing starts. During
the countdown you can cancel the share.
•
Outside a call, the sharing starts immediately.
5. Sharing starts.
15513.07 Cisco Board and Desk Series User Guide MAY 2025
All contents © 2025 Cisco Systems, Inc. All rights reserved

About Miracast

Miracast uses Wi-Fi Direct
to establish a direct network
connection from your laptop to
the Cisco device, allowing you
to share content wirelessly. This
works both in and out of calls: to
share in-call, start the call first.
Making or receiving a call during
an active share will disconnect
your Miracast session. Read this
article on Webex Help Center for
more information.
42