Wheel/Caster Assembly - Craftsman 17776 - Clean N Carry 4 Gal. Wet-Dry VAC Owner's Manual

Wheel/Caster Assembly
WARNING: For your own safety,
never connect plug to power source
outlet until all assembly steps are
complete and you have read and
understood the safety and operation
instructions, Do not operate vac with
any parts damaged or missing.
Locate the two large wheels and the two
dual wheel casters in the carton. The
casters are designed to fit in the front of
your 4=gallon drum and the larger wheels
fit the rear of the drum.
1.Place the drum upside down on a flat
surface as illustrated.
2. Insert the dual wheel casters into the
bottom of the drum as shown (two
places).
3. Push the caster until the flange on the
caster stem is inserted all the way into
the socket. You will be able to hear the
flange snap into the socket. The caster
will swivel easily when positioning is
correct.
4. Position the dove tail portion of one of
the large wheels into the drum as
illustrated. Tap the wheel support into
the drum with a soft mallet. Repeat for
the second large wheel.
Casters (2)
"-Wheels (2)
Float/Cage Assembly
NOTE: If filter cage needs to be removed,
use a flat blade screwdriver and insert the
blade near one of the tabs between the
filter cage and the center ring of the lid.
Pry the tab out of the slot. Tilt the cage and
lift away from the lid. To replace, follow the
assembly instructions below:
1. Grasp latches on both the right and left
side of the power head. Slowly pull
latches away from drum and lift the
power head off the drum. Flip the power
head and place it in the drum.
2. Locate the float. Place the float over the
opening in the center of the lid.
WARNING: To avoid personal injury
or damage to vac be sure to keep
hands, fingers, or any other foreign
objects out of the center opening
when assembling the float.
3. Line up filter cage tabs with the slots in
the center ring of the lid.
4. Push on the filter cage until the tabs
snap into the slots for a secure fit. (One
tab at a time).
_Power Head
- Filter Cage
Lid\ ('_-_-- Filter Tab (3)
\ ',--J "_ Float
___- Fi,ter Tab
\___ .... Power
Head