Accessory And Hose Storage - Craftsman 17765 - 5.0 Peak HP Wet/Dry Vac Owner's Manual

Wet/Dry Vac Assembly (continued)
Cord Wrap
The wet/dry vac has a convenient cord
wrap area designed on the rear of the
vac. Simply, wrap the power cord around
the push/pull handle and cord wrap, then
snap the connector on the plug to a wrap /
of the cord. The cord is now wrapped for
storage.
Press
;e and
Pull
_. Push/Pull Handle
\
Blowing
...
_-__z:__ Push/
-
_Pull Handle
/ \ Cord
Drum
Wrap
Handle
On-Off
Switch
Vaccum
/ Port
Release
Button
Swivel
End
Insert Hose
Insert the hose locking end of the "Pos-I-
Lock" hose into the inlet of the vac. The
hose should snap into place. To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
Drum
Drain Utility Nozzle
Accessory and Hose Storage
Your accessories may be stored in the ping it around the unit and plugging the
caster feet or in the storage locations on open end into one of the storage Ioca-
the lid. The hose may be stored by wrap- tions on the caster feet.
j Accessories
Storage i
Location /
/ Hose
Power
Assembly
')
Open
Of Hose
Push Button
End Of Hose