Acer SpatialLabs View Pro 27 ASV27-2P User Manual page 44

The setting options include:
• Input: Selects the input source (HDMI / DP / DP ALT). Default: HDMI.
• Auto Source: Enables/Disables the monitor to automatically search
for available input sources (Off / On). Default: On.
• Wide Mode: Adjusts the aspect ratio of the monitor (Full / Aspect / 1:1).
Default: Full.
• Hot Key Assignment: Assigns the function that the hot keys on the OSD
portal will access.
• Hot Key 1 (Modes / Volume / Gamma / Contrast / Low Blue Light /
Over Drive / VRB). Default: Modes.
• Hot Key 2 (Brightness / Volume / Gamma / Contrast / Low Blue Light /
Over Drive / VRB). Default: Brightness.
• DDC/CI: Enables/Disables you to configure the monitor using
software installed on your computer (Off / On). Default: On.
Note: DDC/CI stands for Display Data Channel/Command Interface. It
enables users to send commands to adjust the monitor's configurations.
• HDMI Black Level: Adjusts the black level range of an HDMI input
source (Normal / Low). Default: Normal.
• Quick Start Mode: Speeds up the monitor's boot-up process (Off /
On). Default: Off.
32