Connecting/Disconnecting The Device; General Instructions - Acer Spatiallabs View Pro 27 Asv27-2P User Manual

Note: When using a microfiber cloth:
1. Make sure the microfiber cloth is clean.
2. Wipe the dirty areas in one direction until the dirt is removed.
*If there is still residual dirt, use other clean section of the microfiber cloth
to wipe the dirt.
3. When finished, rinse the microfiber cloth with detergent and dry the
microfiber cloth completely.
4. Place the microfiber cloth back into the original packaging to ensure it
does not get dust on it.

Connecting/Disconnecting the Device

Observe the following guidelines when connecting and disconnecting power from
the LCD monitor:
• Make sure the monitor is attached to its base before connecting the
power cord to the AC power outlet.
• Make sure both the LCD monitor and the computer are turned off
before connecting any cable or unplugging the power cord.
• If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.

General Instructions

• Do not place the LCD display near a window. Exposing the display to
rain, moisture or sunlight can cause severe damage.
• Do not apply pressure to the LCD screen. Excessive pressure may cause
permanent damage to the display.
• Do not attempt to service this unit yourself. All services should be
performed by authorized technicians.
• Immediately unplug your display and call an authorized technician if any of
the following circumstances occur:
a. The Display-to-PC signal cable is frayed or damaged.
b. The LCD display is spilled with liquid or exposed to rain.
c. The LCD display or case is damaged.
iv