Getting Started; Package Contents; Mounting - D-Link Dfl-1000 Manual

Getting started

This chapter describes unpacking, setting up, and powering on your DFL-1000. Once you have
completed the procedures in this chapter, you can proceed to one of the following:
• If you are going to run your DFL-1000 in NAT/Route mode, go to
• If you are going to run your DFL-1000 in Transparent mode, go to
This chapter includes:
•

Package contents

•

Mounting

• Powering on
•
Next steps
Package contents
The DFL-1000 package contains the following items:
• The DFL-1000
•
One orange cross-over ethernet cable
• One gray regular ethernet cable
•
One null-modem cable
•
The DFL-1000 QuickStart Guide
•
One power cable
•
A CD containing this DFL-1000 User Manual and the DFL-1000 CLI Reference Guide
•
Two 19-inch rack mount brackets
•
Registration Card
DFL-1000 package contents
Mounting
The DFL-1000 can be installed on any stable surface. Make sure the appliance has at least 1.5 in. (3.75
cm) of clearance on each side to allow for adequate air flow and cooling.
The DFL-1000 can also be mounted on a standard 19-inch rack. It requires 1 U of vertical space in the
rack.
DFL-1000 User Manual
NAT/Route mode installation
Transparent mode installation
15