System Connection; Outputting To A Video Monitor - Canon 0213B002 Instruction Manual

Ntsc/pal visualizer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
4

SYSTEM CONNECTION

The following equipment can be connected to the input and output terminals. Use the included power cord.
For cables other than the power cord and the RGB cable, use commercially available cables. For details of
operation, refer to the instruction manual of the equipment to be used.
Output Equipment
Projector
To RGB input terminal
RGB cable
When connecting to equipment such as a video monitor or a
NOTICE
VCR, check if your RE-455X model uses NTSC or PAL
format, and use equipment compatible with the appropriate
format.
15
Video monitor
RGB monitor
Video
cable
VIDEO
S VIDEO
OUT
OUT
RGB IN
RGB OUT
RGB cable
AV equipment
To S-video input terminal or video input terminal
S-video cable
Rear panel
RS-232C
AC INLET
RS-232C cable
Computer
To control the RE-455X remotely with a computer, proceed in
the following order.
1) Connect the unit to the computer with a RS-232C cable.
2) Turn the unit and computer power ON.
3) Operate the computer.
Please consult your dealer for details.
Outputting to a video
monitor
To output to a video monitor,
connect the RE-455X to a
monitor's video input terminal
using a commercially available
video cable. The video monitor
projects images from the camera
head, regardless of the selected
input equipment.
Use XGA-compatible
projectors and RGB
monitors.
When using video
output and S-video
output, dark areas
may appear on the
periphery of the
screen.
power outlet
Power cord
To control with a computer
To AC

Advertisement

Table of Contents
loading

This manual is also suitable for:

455x - re document cameraRe-455x

Table of Contents