Table of Contents
Advertisement
! Press
or
until the display shows the desired temperature setpoint.
! Press
,
Leave
Return
programmed.
! Repeat each step in Program the First Day for the rest of the week.
NOTE:
After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
Run
! Press
when the entire week is programmed.
Program
Copy a Day
Your thermostat can copy program settings from one day to another.
! Press
,
Wake
Leave
! Press
until the display shows the day you want to copy.
Day
! Press
.
Copy
! Press
until the display shows the day you want to copy to.
Day
! Press
to accept the change.
Copy
! Repeat these steps for each day you want to copy.
NOTE:
donE appears for two seconds and then the normal program display appears.
69-1532—2
or
and repeat these steps for each program period. The First Day is now
Sleep
,
or
to enter programming mode.
Return
Sleep
16
Mon
M13327
Mon
Wed
M13328
M13329
Advertisement
Table of Contents
