Download  Print this page

Honeywell CT3200 Installation And Programming Instructions page 13

Weekday/weekend (5-day/2-day) programmable heat and/or cool low voltage (20 to 30 vac) thermostat and mounting plate
Hide thumbs

Advertisement

Program period
WAKE
LEAVE
RETURN
SLEEP
Programming tips
You do not need to program times and temperatures for all program periods.
If you decide not to program your thermostat, it will automatically control heating at 68 F (20 C), and cooling at 78 F
(26 C), 24 hours a day.
If you decide not to program weekend schedules, the temperature that is programmed for the weekday SLEEP
schedule will remain in effect until the next program period, which begins on Monday morning.
The temperatures cannot be set any higher than 88 F (31 C) or any lower than 45 F (7 C).
When pressing the buttons, use the ball of your finger or a soft pencil eraser. Use of sharp fingernails or pencil points
can damage the keypad.
If you make an error at any time during programming, press
period where you left off.
69-0653-6
Description
The time when you get up and get ready to leave your home.
You can set the system at a comfortable temperature for this
period.
The time when you are regularly away from home. You can set
up an energy-saving temperature for this period.
The time between returning home and going to bed. You can
set the system at a comfortable temperature for this period.
The time when you are sleeping. You can set up an energy-
saving temperature for this period.
When available
Weekdays and weekend
Weekdays only
Weekdays only
Weekdays and weekend
. Then press
until you reach the program
13
PROGRAMMING

Hide quick links:

Advertisement

loading

  Related Manuals for Honeywell CT3200

This manual is also suitable for:

Magicstat ct3200