1. General specifications WL1BKR23 and WL1BKT23 is a small size and low power wireless audio transmitter module, which is designed based on Beken CC258 MCU and Beken BK5813 RF Chip. ■ Forced the 5.2 / 5.8 GHz GFSK modulation [CE/UKCA only used 5.8GHz] ■...
Page 4
WL1BKR23 is a client device controlled by the WL1BKT23. WL1BKT23 device is classified as a master device. WL1BKR23 is classified as a Client device under the control of the WL1BKT23. The product automatically stops the transmission if the information fails to be transferred or the operation fails.
Page 5
Block diagram WL1BKT23(TX) RF IC WL1BKR23(RX) RF IC Note: Frequencies of this transmitter 5155-5245MHz & 5730-5848MHz. Note: CE/UKCA only used 5730-5848MHz. Note: MCU built-in memory 256K, MCU built-in flash memory 192K and power supply regulation...
Page 6
(AV) (FCC / IC Used) WL1BKT23(TX) 5730-5848MHz dBm (E.I.R.P) (EU UKCA Used) 5155-5245MHz dBm (AV) (FCC / IC Used) RF Output Power dBm (AV) (FCC / IC Used) WL1BKR23(RX) 5730-5848MHz dBm (E.I.R.P) (EU UKCA Used) Channels List ANT1 Antenna pe/Gain ANT2...
Page 7
The final end product must be labeled in a visible area with the following: “Contains FCC ID: BEJ-WL1BKT23”, “Contains IC: 2703H-WL1BKT23” . “Contains FCC ID: BEJ-WL1BKR23”, “Contains IC: 2703H-WL1BKR23” . The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met.
Need help?
Do you have a question about the WL1BKR23 and is the answer not in the manual?
Questions and answers