Advertisement
Advertisement
Table of Contents
Related Manuals for Orei EX-170C
Summary of Contents for Orei EX-170C
- Page 1 HDMI Extender over single 50m/164ft UTP Cables with IR Control User manual VER:1.1...
- Page 2 Thank you for purchasing this product. For optimum p e r f o r m a n c e a n d s a f e t y, p l e a s e r e a d t h e s e instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
-
Page 3: Package Contents
The extender includes two units: transmitting unit and receiving unit. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR control signals. The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application. -
Page 4: Speci Cations
Support copy EDID from receiver display or loop out display. Allows for cascading via additional HDMI loop out port. Support Power over cable function. Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6 cable. Works with HDMI and HDCP compliant devices. Supports up to 1080p High De inition resolution. Compact design for an easy and lexible installation. Video Bandwidth Single-link 165Mhz [ 4.95Gbps] 4. Spec ications Video Support 480i/480p/720p/1080i/1080p @60 Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio Transmission Range: HD [1080p 24-bit color] – up to 50m [164ft] Input TMDS Signal 3.3 volts Input DDC Signal 5.0 volts/P-P ESD Protection: Human Body model:+/- 8 kV (air-gap discharge) +/- 4 kV (contact discharge) HDMI connector Type A 19 pin female... -
Page 5: Mechanical Specs
RJ-45 connector WE/SS 8P8C 3.5mm connector (TX and RX) IR Receiver/IR Blaster MECHANICAL SPECS Housing Metal enclosure Power Supply (1) 5V1A DC Power consumption 1.5 watts (TX); 1.0 watts (RX) Operation temperature 32~104 °F Storage temperature -4 ~140 °F Relative humidity 20~90 % RH (no condensation) 5. Panel descriptions 5.1 Transmitting unit output port of your source equipment such as 1. HDMI in: This slot is where you connect the HDMI DVD/Blu-ray players or Set-Top-Box with an HDMI cable. - Page 6 function,switch to right position,the extender will 2. EDID: The switcher can switch copy EDID copy hdmi loop out display EDID information to source. Switch to left position,the extender will copy Receiver display EDID to source. of your display such as an HDTV. 3. HDMI out: This slot is to connect the HDMI input the package for IR signal transmission. Pace the IR 4. IR out: Connect the IR Blaster cable included in blaster in direct line-of-sight of the equipment to be controlled. device is connected with power supply. 5. Power LED: This LED will illuminate when the with the CAT input of the receiver with CAT5E/6 6. CAT: Connect the CAT output of the transmitter cable. device is connected to HDMI source. 7. Link LED: This LED will illuminate when the unit and connect the adaptor to an AC outlet. 8. DC 5V: Connect from 5V DC power supply into the...
- Page 7 5.2 Receiver unit 1. EQ switcher: HDMI Receiver equalizer switcher. port of your display such as an HDTV. 2. HDMI out: This slot is to connect the HDMI input reception. Ensure that remote being used is within 3. IR in: Connect to the IR Receiver for IR signal the direct line-of-sight of the IR receiver. device is connected with power supply. 4. Power LED: This LED will illuminate when the CAT output of the transmitter with CAT5E/6 cable. 5. CAT: Connect the CAT input of the receiver with the signal from the transmitter is stable. 6. Lock LED: This LED will illuminate when the HDMI unit and connect the adaptor to an AC outlet. 7. DC 5V: Connect from 5V DC power supply into the...
- Page 8 If you see lickering or blinking image on the 5.3 RX Equalizer distance adjust display, adjust the EQ switch to improve the cable skew. MAX stands for the strongest HDMI signal level for the longest possible transmission length while MIN stands for the weakest HDMI signal level for short transmission length. Adjust the signal level from MIN to MAX until desired video quality is displayed.
-
Page 9: Connection Diagram
6. Connection diagram DVD or Blu-ray Player... -
Page 10: Connect And Operate
1. Connect a source such as a Blu-Ray Player, game 7. CONNECT AND OPERATE console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the Transmitting unit. to the HDMI output on the Receiving unit. 2. Connect a display such as an HDTV or HD Projector the output of the Transmitting unit, and the other end 3. Connect a single Category 5e/6 up to 164ft/50m to to the input of the Receiving unit. 4. For power, plug both the Transmitting unit and Receiving unit with the included power supplies. 5. Power on each device in the same sequence (receiver and transmitter will already be powered when either unit is plugged in.) At this point the display connected should display the source signal connected to the extender set. If no... - Page 11 vertical refresh rate may work better than 60 Hz or higher. Use the source remote at the receiver emitter to test IR functionality. If the IR remote function is not responding, check the emitters to ensure they are placed correctly and are plugged into the correct IR jacks on the Extender set receiving and transmitting units. 8. Wideband IR(30KHz---60KHz) introduction IR RECEIVER IR BLASTER IR BLASTER (TX) of transmitter unit; place blaster in front of the IR eye...
- Page 12 To control the source: Plug IR Receiver into IR RX IR RECEIVER (RX) port of receiver unit; place receiver at or near display.
Need help?
Do you have a question about the EX-170C and is the answer not in the manual?
Questions and answers