Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dahua SG4010-2F
Summary of Contents for Dahua SG4010-2F
- Page 1 Ethernet Switch (8-Port Gigabit Managed Switch) Quick Start Guide V1.0.0...
-
Page 2: Foreword-Nopoe
Foreword-nopoe General This manual mainly introduces the hardware, installation, and wiring steps of the 8-port Gigabit managed switch (hereinafter referred to as "the device"). Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. - Page 3 might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ● There might be errors in the print or deviations in the description of the functions, operations and technical data.
-
Page 4: Important Safeguards And Warnings
Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, and comply with the guidelines when using it. Transportation Requirements Transport the device under allowed humidity and temperature conditions. Storage Requirements Store the device under allowed humidity and temperature conditions. -
Page 5: Operation Requirements
Operation Requirements ● Do not disassemble the device without professional instruction. ● Operate the device within the rated range of power input and output. ● Make sure that the power supply is correct before use. ● Make sure the device is powered off before disassembling wires to avoid personal injury. ●... -
Page 6: Table Of Contents
Table of Contents Foreword-nopoe ......................................I Important Safeguards and Warnings ............................III 1 Overview ........................................1 1.1 Introduction ....................................1 1.2 Features ......................................1 2 Structure ........................................2 2.1 Front Panel ....................................2 2.2 Rear Panel ...................................... 2 3 Installation ....................................... 4 3.1 Preparations .................................... -
Page 7: Overview
1 Overview 1.1 Introduction Equipped with a high performance switching engine, the switch performs optimally. It has low transmission delay, large buffer and is highly reliable. It also has a strong switching capability and optimizes transmission performance when accessing Ultra HD videos. With its full metal and fanless design, the device has great heat dissipation and low power consumption, working in environments ranging from –10°C to 55°C (+14°F to +131°F). -
Page 8: Structure
2 Structure 2.1 Front Panel Figure 2-1 Front panel Table 2-1 Front panel description Name Description Displays the Act status of the downlink port. Downlink port Act ● Flashes: Data receiving and sending. indicator ● Off: No data receiving and sending. Displays the Link status of the downlink port. - Page 9 Table 2-2 Rear panel description Name Description Ground terminal GND. Power input port Supports 12 VDC.
-
Page 10: Installation
3 Installation 3.1 Preparations ● Select a proper installation method according to your actual needs. ● Make sure that the working platform is stable and steady. ● Leave about 10 cm space for heat dissipation to ensure good ventilation. 3.2 Desktop Mount The switch supports desktop mount. -
Page 11: Wiring
3.4 Wiring 3.4.1 Ethernet Port Figure 3-2 Ethernet port pin number 10/100/1000 Mbps Base-T Ethernet port adopts standard RJ–45 port. Equipped with self-adaptation function, it can be automatically configured to full duplex/half-duplex operation mode, and supports MDI/MDI-X self-recognition function of the cable, which means that the switch can use cross-over cable or straight-through cable to connect terminal device to network device. -
Page 12: Sfp Port
Figure 3-5 Cable sequence of RJ45 DB9 One end of RJ–45 DB9 cable is RJ–45 connector, which needs to be inserted into the console port of the device. And the other end is DB9 plug, which needs to be inserted into the computer controlling 9-pin serial port. -
Page 13: Gnd
Procedure Step 1 Lift the handle of SFP module upward vertically, and then stuck it to the top hook. Step 2 Hold the SFP module by both sides, and then push it gently into the SFP slot till the SFP module is firmly connected to the slot. -
Page 14: Quick Operations
4 Quick Operations We will introduce VLAN configuration briefly in this section. See the corresponding command line manual for detailed configuration. You can log in to web page of the device via the following IP address. Table 4-1 Device factory default Parameter Description IP address... -
Page 15: Appendix 1 Cybersecurity Recommendations
Appendix 1 Cybersecurity Recommendations Mandatory actions to be taken for basic device network security: 1. Use Strong Passwords Please refer to the following suggestions to set passwords: ● The length should not be less than 8 characters. ● Include at least two types of characters; character types include upper and lower case letters, numbers and symbols. - Page 16 the risk of ARP spoofing. 8. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. 9. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks.
Need help?
Do you have a question about the SG4010-2F and is the answer not in the manual?
Questions and answers