Other Connections; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha BD-A1000 Owner's Manual

■ Connecting to the REMOTE
CONTROL jacks
– You can transmit and receive the remote control
signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
– Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
– If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals, you
can control the Player with the SCENE function.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
This Player
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
To remote
control in
jack
REMOTE CONTROL IN
Yamaha component
Infrared signal receiver
or Yamaha component
(such as AV receiver)
Hints
– For details about the SCENE function, refer to the
owner's manual supplied with your Yamaha AV
receiver.

OTHER CONNECTIONS

To REMOTE
CONTROL (IN)
jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
To remote
control out
jack
REMOTE CONTROL OUT
– You can connect a Yamaha component (such as CD
player) supports the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
– The RS-232C terminal is a control expansion
terminal for commercial use. Consult your dealer for
details.

■ Connecting the power cable

– After all connections are completed, plug the
supplied power cable into the AC IN on the rear of
the Player. Then plug into AC outlet.
To AC outlet
Note
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
To AC IN
17
En
2