Advertisement
Quick Links
CUSTOMER SUPPORT TEL: 01752 511111
www.wallbeds.co.uk
Assembly Instructions
(Model: Beta-DIY)
Wallbed Frame and Cabinet System
The Beta Bed system is designed for cabinet builders to
create high quality wall bed furniture
SINGLE, DOUBLE, KING and Specially-sized Wallbeds
Both Vertical & Horizontal Installations
Contains Mechanism and Hardware
Spring Balance Lift Mechanism - SBLM
Steel Folding Leg System with Segmented Rod (Pat. Pending)
All Necessary Hardware - For Mechanism and Cabinet
Assembly Instructions and Cut Lists for Cabinets
Wall Bed mechanisms and Hardware Components to assist
the Cabinet Builder to create the best wallbed system available
** 5 YEAR WARRANTY **
Designed to Exceed
International ISO 9002 Standards for
Residential Specifications
Copyright by Wallbed Systems Ltd.
No part of this publication may be reproduced
Updated021024WBS
Manufactured by Wallbed Systems Ltd.
or transmitted without permission of the owner.
www.wallbedsystems.co.uk
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hideaway Beds beta bed Beta-DIY
Summary of Contents for Hideaway Beds beta bed Beta-DIY
- Page 1 CUSTOMER SUPPORT TEL: 01752 511111 www.wallbeds.co.uk Assembly Instructions (Model: Beta-DIY) Wallbed Frame and Cabinet System The Beta Bed system is designed for cabinet builders to create high quality wall bed furniture SINGLE, DOUBLE, KING and Specially-sized Wallbeds Both Vertical & Horizontal Installations Contains Mechanism and Hardware Spring Balance Lift Mechanism - SBLM Steel Folding Leg System with Segmented Rod (Pat.
-
Page 2: Project Start Up
Project Start Up Familiarise yourself with all of the components in the Beta-DIY System, as well as thoroughly study this manual so you may plan the steps required to complete the project. Tools, Board and Board Finishing products are not supplied in the Alpha bed kit. These items are noted in the Required Hardware Items on page 5. -
Page 3: Safety Information
Safety Information Please read and understand the instructions prior to assembly. Incorrect installation of products could result in personal injury or physical damage. It is recommended that only qualified trades persons and competent persons install and make adjustments to the wall bed. It is the consumers personal responsibility to ensure all persons are trained in operating the wall bed safely prior to use. - Page 4 (also see p. 21-22)
- Page 5 Handle and handle screws (Installed in bed face)..........
- Page 8 King...
- Page 22 Copyright by Wallbed Systems Ltd. No part of this publication may be reproduced or transmitted without permission of the owner.
- Page 23 Beta Kit leg rod combinations - additional information Different widths of bed frame can be created from the 6 leg rods supplied in the Beta DIY kit. The following table gives the range of permeations possible from leg rods in a standard Beta DIY kit as supplied in a standard package.
Need help?
Do you have a question about the beta bed Beta-DIY and is the answer not in the manual?
Questions and answers