Connections; Connecting A Personal Computer; Connect The Lcd Monitor To A Personal Computer - NEC M40 - MULTEOS - 40" LCD TV User Manual

User manual
Hide thumbs Also See for M40 - MULTEOS - 40" LCD TV:
Table of Contents

Advertisement

Connections

Before making connections:
*
First turn off the power of all the attached equipment and make connections.
*
Refer to the user manual included with each separate piece of equipment.

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards and pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480
31.5kHz
800 x 600
37.9kHz
1024 x 768
48.4kHz
1280 x 768
48kHz
1360 x 768
48kHz
1280 x 1024
64kHz
1600 x 1200
75kHz
1920 x 1080
66.6kHz

Connect the LCD Monitor to a Personal Computer

To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
To connect the RGB/HV connector (BNC) on the LCD monitor, use a signal cable which is available separately
(mini D-sub 15 pin to BNC x 5). Select RGB/HV from the INPUT button.
When connecting one or more LCD monitors, use the RGB OUT connector (BNC).
The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select [IN1], [IN2] or [IN3] from the AUDIO INPUT
button.
LCD monitor
Remarks
Vertical
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Compressed image
60Hz
Recommended resolution
BNC x 5
English-14
To RGB/HV IN
BNC x 5
BNC x 5
To audio output
To analog RGB output
Mini D-sub 15 pin
LCD monitor (second monitor)
PC or IBM compatible

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multeos m46

Table of Contents