Related Manuals for Bells Of Steel LAT-MA
Summary of Contents for Bells Of Steel LAT-MA
- Page 1 LAT TOWER 310LB SKU: LAT-MA ASSEMBLY INSTRUCTIONS BELLSOFSTEEL Stuck? Scan the QR code for the assembly video www.bellsofsteel.com | www.bellsofsteel.us | Telephone: 1-888-718-7997...
- Page 2 STRENGTH, ONE BOLT AT A TIME. Welcome to Bells of Steel, you’ve made an excellent choice. I’ve done my best to keep the setup of your new gear business. page for assembly videos or feel free to email us for...
- Page 3 BEFORE WE BEGIN, LET’S STAY SAFE. A GUIDE TO SAFETY appropriate weight plate. It is your responsibility to ensure there is enough in this manual. It is your responsibility to ensure that all users of the when not in use. NOW...
-
Page 4: Parts List
PARTS LIST 12x70 12x80 12x85 10x80 M12 x 85 bolt M12 x 80 bolt M12 x 70 bolt M10 x 80 bolt 10x50 10x60 10x75 M10 x 75 bolt M10 x 60 bolt M10 x 50 bolt 10x20 10x40 10x45 8x40 M8 x 40 bolt... - Page 5 PARTS LIST 12 x 80 elastic cylindrical pin M16 popper tube plug tube plug 5045 tube bushing tube plug tube plug 2550 tube plug PAGE 5 OF 20...
- Page 6 PARTS LIST Carabiners 80 pulleys Weight selector Handle 114 pulleys PAGE 6 OF 20...
- Page 7 PARTS LIST 10LBS 4.5KG 20LBS 9.10KG 30LBS 13.6KG 40LBS 18.2KG 50LBS 22.7KG 60LBS 27.0KG 70LBS 31.8KG 80LBS 36.4KG 40 x1 41 x1 90LBS 40.9KG 100LBS 45.5KG 110LBS 50.5KG 120LBS 54.5KG 130LBS 59.1KG 140LBS 63.6KG 150LBS 68.2KG 160LBS 72.7KG 170LBS 77.3KG 180LBS 81.8KG 42 x1...
- Page 8 PARTS LIST Weight base plate 49 x1 50 x1 51 x1 53 x1 52 x1 56 x1 55 x1 PAGE 8 OF 20...
- Page 9 PARTS LIST 57 x1 64 x2 59 x1 66 x1 Frame plate 60 x1 65 x1 61 x1 54 x2 58 x1 Weight 67 x1 62 x1 63 x1 PAGE 9 OF 20...
-
Page 10: Tools Required
TOOLS REQUIRED 19mm 17mm 14mm Wrench Wrench Wrench ASSEMBLY Attach a 114 diameter pulley (33) to lower beam (46) using M10x45 (8), M10 washers and M10 nut. Do not overtighten. Assemble (52) to (45) with 66 at the bottom. Fix with M12x85 bolt (1), M12 washer(12) and M14 nut (12). - Page 11 ASSEMBLY Fix (47) to assembled frame. Fix Attach (48) to frame. (15) and M14 nut (13). M12 nut (12). Fix the top hole with M12x80 and M12 washer. Attach 2 pieces of (34) below the base plates and attach (36) on M8x60 bolt (11) and M8 washer(16).
- Page 12 ASSEMBLY as shown. PAGE 12 OF 20...
- Page 13 ASSEMBLY as shown. then install (48) onto the guide rods. PAGE 13 OF 20...
- Page 14 ASSEMBLY and M10 nut (13). Tighten as shown Attach (57) and (59). Fix with and M12 nut (12). Attach pre-assembled (67). M10 washer (15) and M10 nut (13). 15 13 PAGE 14 OF 20...
- Page 15 ASSEMBLY Attach 2 114 pulleys (33) Slot to adjust and tighten M10 washer (15) and M10 nut (13). 15 13 Tighten as shown PAGE 15 OF 20...
- Page 16 ASSEMBLY Fix the cable following the pulleys as shown. (15) and M10 nut (13). 15 13 M10 washer (15) and M10 nut (13). Then install on the cable. holes shown. 15 13 PAGE 16 OF 20...
- Page 17 ASSEMBLY pulley (33). Fix the pulley to the pulley holder (64) nut (13). 15 13 to the frame. Fix using (15) and M10 nut (13). Tighten as shown 15 13 PAGE 17 OF 20...
- Page 18 ASSEMBLY Assemble (44) and (65). Fix with M10x40 bolt (9) and M10 washer (15). Slot to adjust and tighten M12 washer (14). 14 12 PAGE 18 OF 20...
- Page 19 ASSEMBLY pulley sleeve (18) and M10 nut (13). Tighten as shown. 15 13 (30) and handle (38). PAGE 19 OF 20...
- Page 20 YOU’RE FINISHED! WANT TO LEARN MORE ABOUT THE BLITZ MAX AIR BIKE? CHECK OUT THE OVERVIEW VIDEO: VISIT OUR SHOWROOMS Calgary - HQ Toronto - Showroom owroom Corpora y AB W 71s N U.S.A. Toronto Store 39 Haist Av support@bellsofsteel.com | 1-888-718-7997 PAGE 20 OF 20...
Need help?
Do you have a question about the LAT-MA and is the answer not in the manual?
Questions and answers