Adjusting The Handset Rest; Touch Screen Features - Cisco 7975G - Unified IP Phone VoIP User Manual

Adjusting the Handset Rest

When you connect your phone, you can adjust the handset rest so that the receiver will not slip out of the cradle. To adjust the
handset:
1. Set the handset aside and pull the square plastic tab from the handset rest.
2. Rotate the tab halfway.
3. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the
handset rest.
1 2

Touch Screen Features

This is what your main touch screen might look like with active calls and several feature menus open.
Primary phone Displays the phone number (directory number) for your primary phone line.
1
line
Programmable Programmable buttons
2
button phone feature buttons. Icons and labels indicate how these buttons are configured.
indicators
Soft key labels Each displays a soft key function. Soft key labels are touch-sensitive.
3
Status line Displays audio mode icons, status information, and prompts.
4
5 Call activity Displays current calls per line, including caller ID, call duration, and call state for the highlighted line
area (standard view). Items in this area are touch-sensitive.
Phone tab Indicates call activity. Press this tab to return to the call activity area, if needed.
6
Feature tabs Each indicates an open feature menu. Tabs are touch-sensitive.
7
3
can serve as phone line buttons, speed-dial buttons, phone service buttons or
5