Adjust The Ring Volume; Select The Ring Type; Adjust The Display Contrast; Divert Incoming Calls - Cisco 7975G - Unified IP Phone VoIP User Manual

Unified ip phone
Hide thumbs Also See for 7975G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Adjust the Ring Volume

• Press the Up or Down Volume button while the handset is in its cradle.

Select the Ring Type

To change the ringer sound:
1. Press the Settings button.
2. Press 2 for Ring Type, or use the Navigation button to scroll to Ring Type and press the Select soft key.
3. Use the Navigation button to scroll through the list of ring types. Press the Play soft key to hear samples.
4. Highlight the ring you want, and then press the Select soft key.
5. Press the Ok soft key to select your setting.
6. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.
7. Press the Exit soft key to return to the main directory menu.

Adjust the Display Contrast

To adjust the contrast in your LCD Display, perform the following steps:
1. Press the Settings button.
2. Press 1 for Contrast, or use the Select soft key.
3. Use the Down or Up soft key to change the contrast.
4. Press the Ok soft key.
5. Press the Save or Exit soft key.
6. Press the Ok soft key to select your contrast setting.
7. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.
8. Press the Exit soft key to return to the main directory menu.
Note
In the following procedures, you may be required to enter information using the keypad. Press the backspace (<<) soft
key to erase digits that were entered incorrectly.

Divert Incoming Calls

To forward any incoming call to the call-forward destination set on the Cisco Unified IP phone:
• Press the DnD soft key.
If the call-forward destination is not set, pressing the DnD soft key disables the ringer.
Note
Park a Call
Call park allows a phone user to place a call on hold at a designated parking spot from which the call can be retrieved by anyone
on the system. To park a call:
• Press the Park soft key
The Cisco Unified Communications Manager Express system will automatically selects an available call part slot and
displays the number on the Cisco Unified IP phone screen.
To park a call to a specific call park slot:
• Press the transfer button followed by the call part slot number provided by your local administrator.
To retrieve a parked call, use one of the following methods:
• If your phone receives a call park notification, press the PickUp soft key followed by the asterisk (*).
11

Advertisement

Table of Contents
loading

Table of Contents