Care of the Drive and Tape Cartridges
Taking Care of Data Cartridges
Labeling Cartridges
Caution Do not stick labels onto a cartridge; they may cause it to jam in the drive
Figure 4.4 Labeling a cartridge
Slot for label
Operating Conditions
4-8
drop or bang a cartridge.
• Do not open the cartridge door unnecessarily. This may expose the tape
to contamination or damage.
• Do not touch the tape or leader. Dust and natural skin oils can affect
tape performance.
• When you remove a cartridge from its plastic case, make sure you do not
accidentally pick up a spare label as well. It will cause problems if it is
inserted into the drive along with the cartridge. Store spare labels
separately to avoid this problem.
mechanism. Use only the labels supplied with the cartridge.
• To label a cartridge, slide an identification label into the slot on the front
of the cartridge (see figure 4.4). Do not stick labels onto any part of the
cartridge. They could cause problems inside the drive.
• Write on labels only with pens that do not produce debris. Do not use
pencil or water-soluble felt pens.
• Never erase a label or use opaquing fluid—replace it.
Cartridges should be used in an environment within the following ranges:
• Temperature: 10°C to 40°C (50°F to 104°F)
• Relative Humidity: 20% to 80% (non-condensing)