Anker PowerConf Manual

Also See for PowerConf:

User manual (107 pages)

User manual (106 pages)

User manual (65 pages)

Table of Contents

Contents

1 At a Glance
2 Connecting
3 Powering On/Off
4 Button Controls
5 Status LED behaviors
6 Charging
7 Audio Output
8 Soundcore App
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Anker PowerConf Manual

At a Glance

Multi-function button
Volume down button
Mute button
Phone call button
Volume up button
Status LED
Power LED

Power button
Bluetooth button

Bluetooth LED
USB port (Type-A) for charge out
Audio output port
USB port (Type-C) for charge in

Connecting

Connect to your computer by using a USB cable.
Connect to your computer or mobile device via Bluetooth pairing.
Power on this product for the first time, it will automatically enter the Bluetooth pairing mode.

	Press	Enter Bluetooth pairing mode
	Flashes blue	Bluetooth pairing
	Steady blue	Bluetooth connected

information

Each time you power on the product, it will automatically connect with the last successfully connected device if available.
To disconnect Bluetooth, press the Bluetooth button again.

Powering On/Off

Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
Powering On/Off

Power LED behavior

	Steady white	Power on
	Light off	Power off

information

Once connected to your computer, it will automatically power on.
It will automatically power off after 30 minutes of inactivity or no source.

Button Controls

	Press or press and hold	Volume up / down
	Press	Answer / End a call
	Press and hold for 2 seconds	Reject a call
	Press	Mute or restore the microphone
	Press	Play / Pause music

Status LED behaviors

Lights up white for 2 seconds	USB connected to computer
Breathes green	Coming call
Lights up blue partly	Sound direction detected
Lights up blue clockwise or counterclockwise	Increase or decrease volume
Turns red	Muted
Lights up green	Press Power button to check the battery level

Charging

Charging this product

Power LED behavior

Steady red Being charged

Steady white Fully charged

Flashes red Low battery
Charging an external device

information

When powered off or being charged, it won't charge out.
When the remaining battery is less than 30%, the charge out current will be 5V 1A; if less than 10%, it won't charge out.

Audio Output

Connect an external speaker to the AUX jack of this product by using an AUX cable (not provided). The audio will be played through the speaker.
Audio Output