Pioneer AVIC-X930BT Installation Manual page 9

Multimedia av navigation receiver
Hide thumbs Also See for AVIC-X930BT:
Table of Contents

Advertisement

Available languages

Available languages

Connecting the system
IP-BUS cable
(supplied with SIRIUS Satellite Radio tuner)
Blue
SIRIUS Satellite Radio
tuner (e.g. CD-SB10)
(sold separately)
"SiriusConnect universal tuner"
or "SIRIUS Dock and Play radio
with SiriusConnect vehicle kit"
(sold separately)
WARNING
· To avoid the risk of accident and the potential violation of applicable laws, this
product should never be used while the vehicle is being driven except for
navigation purposes. And, also rear displays should not be in a location where it
is a visible distraction to the driver.
· In some countries, the viewing of images on a display inside a vehicle even by
persons other than the driver may be illegal. Where such regulations apply they
must be obeyed and this product's video source should not be used.
4 m (13 ft. 1 in.)
3.55 m (11 ft. 8 in.)
( * 5)
The AVIC-Z130BT is equipped with a built-in HD Radio™ tuner,
which makes installation of an additional tuner unnecessary.
However, if you use the AVIC-X930BT or the AVIC-X9310BT, you
will need to install a HD Radio™ tuner.
Black
SiriusConnect cable
(sold separately)
GPS antenna
( * 5)
IP-BUS cable
(supplied with HD Radio™ tuner)
HD Radio™ tuner(e.g. GEX-P20HD)
Vehicle
(sold separately)
antenna
Note
When connecting an HD Radio™ tuner, plug the
vehicle's antenna into the HD Radio™ tuner's
antenna jack. There is no need to connect the
vehicle's antenna to the antenna jack of the
navigation unit.
Section
02
Black
9
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-z130btAvic-x9310bt

Table of Contents