Initial Settings; Displaying The Initial Settings Menu; Switching The Warning Tone; Switching The Auxiliary Setting - Pioneer AVIC S1 - Automotive GPS Receiver Operation Manual

Initial Settings

Initial settings lets you perform initial set up of different settings for Pioneer AV Head Unit
(AVH-P6400CD or AVH-P6400).

■Displaying the INITIAL SETTINGS MENU

1 Press SOURCE button and hold until the source off.
2 Press A.MENU (AUDIO) button and the OFF SOURCE MENU is displayed.
3 Press 5 or ∞ to select "INITIAL SETTINGS", and press A.MENU (AUDIO) button.
The INITIAL SETTINGS MENU is displayed as follows:
DETACH WARNING, AUX (AUXILIARY), REAR SPEAKER, TEL/GUIDE MUTE/
ATT
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
Use the following instructions to operate each particular setting.
➲
To cancel initial settings, press BAND/ESC button.

■Switching the warning tone

If the operation panel of AV Head Unit is not detached from the AV Head Unit within five
seconds of turning off the ignition, a warning tone will sound. You can turn off this warning
tone.
1 Press 5 or ∞ to select "DETACH WARNING" from the INITIAL SETTINGS MENU, and
press A.MENU (AUDIO) button.
2 Select WARNING ON or OFF with 5/∞.
Pressing 5/∞ will switch WARNING between "ON" and "OFF".

■Switching the auxiliary setting

It is possible to use auxiliary equipment with Pioneer AV Head Unit (AVH-P6400CD or
AVH-P6400). Activate the auxiliary setting when using auxiliary equipment connected to
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400).
1 Press 5 or ∞ to select "AUX (AUXILIARY)" from the INITIAL SETTINGS MENU, and
press A.MENU (AUDIO) button.
2 Select AUX ON or OFF with 5/∞.
Pressing 5/∞ will switch AUX between "ON" and "OFF".
158