Connecting Power And Usb Cables, Dat 320 Tape Drives; Connecting Power And Usb Cables, All Other Models - HP 157770-001 - DAT Drive 20/40 Tape User Manual

1. Plug the power cable securely into the socket on the rear panel of the drive and plug the other
end of the power cable into the power outlet.
1. USB cable (pre-fitted)
2. on/off button on front panel
Figure 14 Connecting power and USB cables, DAT 320 tape drives
.
1. USB cable (pre-fitted)
2. on/off switch, make sure it is in the OFF position (O side down)
Figure 15 Connecting power and USB cables, all other models
.
32 Installing an external DAT tape drive
3. power cable
3. power cable