Grounding Instructions; Radio Interference - Haier HMV1630DBBB User Manual

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord grounding wire with a
grounding plug. The plug must be plugged into an outlet that is properly installed
and grounded.
Consult a qualified electrician or service technician if the grounding instructions
are not completely understood or if doubt exists as to whether the appliance is
properly grounded. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-pronged grounding plug, and a 3-slot
receptacle that will accept the plug on the appliance. The marked rating of the
extension cord shall be equal to or greater than the electrical rating of the appliance.
1. A short power-supply cord is provided to reduce the risks resulting from
becoming entangled in or tripping over a longer cord.
2. Longer cord sets or extension cords are available and may be used if care is
exercised in their use.
3. If a long cord sets or extension cord is used:
1) The marked electrical rating of the cord set or extension marked
electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance.
2) The extension cord must be a grounding-type 3-wire cord; and
3) The longer cord sets should be arranged so that it will not drape
over the countertop or tabletop where it can be pulled on by
children or tripped over unintentionally.

RADIO INTERFERENCE

1. Operation of the microwave oven may cause interference to your radio, TV
or similar equipment.
2. When there is interference, it may be reduced or eliminated by taking the
following measures:
3. If a long cord sets or extension cord is used:
1) Clean door and sealing surface of the oven.
2) Reorient the receiving antenna of radio or television.
3) Relocate the microwave oven with respect to the receiver.
4) Move the microwave oven away from the receiver.
5) Plug the microwave oven into a different outlet so that microwave
oven and receiver are on different branch circuits.
English
6