Page 1
INTRODUCTION Thank you for acquiring the 316T, part of DT Research’s line of medical tablets. Featuring a slim, robust enclosure, the 316T with a 15.6” TFT display is powered by the Intel® processor, offering optimal combinations of performance and power savings.
Ethernet Port A 316T typically integrates an 802.11ax wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your 316T does not come with such a network adapter, please consult your device provider to establish the Button Functions desired network connectivity.
To activate the 316T, push and quickly release the Power Button. The display will come connection may take 10-15 seconds to be established. on in a few seconds. To put the 316T in Standby mode, push and quickly release the Power Button. To turn the 316T off for extended storage, power off...
USING THE MOBILE TABLET Peripherals Support Through its USB port, the 316T supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates. For More Support Users can download the Tablet Modules Basic Operation Guides from the DT...
Page 5
To be protected against all verified adverse effects, the separation distance of at least 0mm must be maintained between the antenna of the radio having max. 3.9dBi antenna and all persons. Hereby, [DT Research, Inc.] declares that the radio equipment type [316T] is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at the following internet address: http://www.dtresearch.com.
5. Prohibited for control of or communications with unmanned aircraft systems, including drones. Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: 316T Model No.: Responsible Party – U.S. Contact Information DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com...
IC Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Need help?
Do you have a question about the 316T and is the answer not in the manual?
Questions and answers