In the HOUR/MINUTE setting mode, push the reset but-
ton [A] again to effect the HOUR setting mode.
The hour display flashes [B] on the display.
Push the mode select button to set the hour.
In the HOUR setting mode, push the reset button [A] once
to effect the MINUTE setting mode.
The minute display flashes [B] on the display.
Push the mode select button to set the minute.
Set the minute, push the reset button [A] to return to the
HOUR/MINUTE setting mode.
Push the mode select button [B] to complete the time set-
The clock starts counting the seconds as soon as the
mode select button is pushed.
LCD Segment Inspection:
Disconnect the meter harness connectors [A] in the head-
light body (see Headlight Body Removal).
 FI Indicator, water temperature warning, Oil pres-
sure waring LED Lights, fuel level indicator light,
Speedometer and Tachometer (+)
 Speedometer, Tachometer Lights, Speedometer and
 Tachometer Pulse
 Speedometer and Tachometer Lights (+)
 Water Temperature Waring LED Light (−)
 Battery (+)
 Distance Sensor Pulse
 FI Indicator LED Light (−)
 Oil Pressure Waring LED Lights (−)
 Speed Sensor Signal
 Speed Sensor Supply Voltage
 Fuel Reserve Switch Signal
Do not short each terminals. When inspecting the
meter unit be sure to connect each connections.
ELECTRICAL SYSTEM 16-75