Using the jack and the attachment jack, raise the rear
wheel off the ground (see Wheels/Tires chapter).
Special Tools - Jack: 57001–1238
Attachment Jack: 57001–1398
Brake Reservoir Cover [A]
Brake Reservoir (see Brakes chapter)
Open the lead clamps [B]
Remove the right front footpeg bracket [C] by taking off
the bolts [D] with the brake pedal and rear master cylinder
Remove the front exhaust pipe [E] (see Engine Top End
Pull out the caps [F]
Support the engine with a commercially available stand
Engine Mounting Bracket Bolts [B]
Downtube Bolts [C]
Take off the brake hose [A] from the clamps [B].
Run the brake hose inside the down tube and clamp it.
Put the stopper [A] of the radiator into the grommet [B] of
the down tube.
Torque - Downtube Bolts: 44 N·m (4.5 kgf·m, 32 ft·lb)
Engine Mounting Bracket Bolts:
kgf·m, 18 ft·lb)
25 N·m (2.5