Install the removed parts.
Front Brake Hose Joint
Front Wheel (see Wheels/Tires chapter)
Install the turn signal lights [A].
Run the signal light leads [B] to the clamp portion [C] of
the signal light.
Clamp the signal light leads onto the headlight body
Install the headlight unit (see Electrical System chapter).
Check and adjust the following items after installation.
Steering (see Periodic Maintenance chapter)
Throttle Cables (see Fuel System chapter)
Check the front brake effectiveness.
Do not attempt to ride the motorcycle until a full
brake lever is obtained by pumping the brake lever
until the pads are against the disc. The brakes will
not function on the first application of the lever if
this is not done.
Steering Stem Warp
Whenever the steering stem is removed, or if the steering
cannot be adjusted for smooth action, check the steering
stem for straightness.
If the steering stem [A] is bent, replace the steering stem.