Rear Master Cylinder Removal
Remove the brake fluid reservoir cover (see Brake Pedal
Draw out the brake fluid from the reservoir with a means
like the fork oil level gage.
Remove the brake fluid reservoir (see Brake Pedal Posi-
Unscrew the brake hose banjo bolt [A] on the master cylin-
Loosen the master cylinder mounting bolts [B].
Unscrew the footpeg bracket bolts [C].
Rear Master Cylinder Mounting Bolts
Brake Pedal Return Spring (see Brake Pedal Removal)
Brake Switch Return Spring [B] (see Brake Pedal Re-
Brake Lever (see Brake Pedal Removal)
Remove the cotter pin [A] and joint pin [B].
Slide the reservoir hose lower end clamp [A].
Pull out the reservoir hose lower end [B], and drain the
brake fluid into a container.