Brake Lever, Brake Pedal
Remove the right front footpeg bracket bolts [A] and turn
over the footpeg [B].
Loosen the locknut [A] and turn the push rod with the hex
head [B] to achieve the correct pedal position.
If the length [C] is 80 ±1 mm (3.1 ±0.04 in.), the pedal
position will be within the standard range.
Torque - Push Rod Locknut: 18 N·m (1.8 kgf·m, 13 ft·lb)
Brake Pedal Removal
Remove the brake fluid reservoir [A] (see Brake Pedal
Loosen the rear master cylinder mounting bolts [B].
Remove the right front footpeg bracket bolts [C], and turn
over the footpeg [D].
Rear Master Cylinder Mounting Bolts [A]
Brake Pedal Return Spring [B]
Brake Switch Return Spring [C]
Unscrew the brake pedal clamp bolt [A].
Pull out the brake lever [B] with the master cylinder in-