Brake Lever, Brake Pedal
Brake Lever Position Adjustment
The brake lever adjuster has 5 positions so that the brake
lever position can be adjusted to suit the operator's hand.
Push the lever forward and turn the adjuster [A] to align
the number with the arrow mark [B] on the lever holder.
The distance from the grip to the lever is minimum at num-
ber 5 and maximum at number 1.
Brake Pedal Position Adjustment
Check that the brake pedal [A] is in the correct position.
About 110 mm (4.33 in.) [B]
(height from pedal top to footpeg top [C])
Usually it's not necessary to adjust the pedal position,
but always adjust it when push rod locknut has been
If the push rod length cannot be adjusted by turning the
clevis, the brake pedal may be deformed or incorrectly
Unscrew the brake fluid reservoir cover bolt [A] and re-
move the brake fluid reservoir cover [B].
Unscrew the reservoir bolt [A] and take off the brake fluid