Shift Pedal Removal
Unscrew the footpeg bracket bolts [A] and take off the left
front footpeg [B].
Unscrew the clamp bolt [B] and pull out the shift pedal [A].
Shift Pedal Installation
Install the shift pedal [A] so that the punched mark on the
shaft is aligned [B] with the punched mark on the pedal.
Tighten the clamp bolt (the head is numbered 10).
Torque - Shift Pedal Clamp Bolt: 30 N·m (3.1 kgf·m, 22 ft·lb)
External Shift Mechanism Removal
Shift Pedal (see this chapter)
Alternator Outer Cover (see Electrical System chapter)
Engine (see Engine Removal/Installation chapter)
Front and Rear Shift Levers [A]
Front Gear Case [B] (see Final Drive chapter)
Remove the shift shaft [A] while pushing [B] the shift
mechanism arm [C] towards the shift shaft.
Unscrew the bolt and remove the gear set lever [D] and