Install the alternator rotor [A] while fitting the alignment
notch [B] of the splines onto the alignment tooth [C].
Be sure to align the balancer gear mark with the alternator
mark (shorter line mark) [A] while keeping the front piston
on its top dead center.
Top Mark for Rear Piston [B] (longer mark)
Top Mark for Front Piston [C] (longer mark)
Apply molybdenum disulfide oil to the threads and the
seating surface of the left balancer gear bolt and alter-
nator rotor bolt.
Holding the alternator rotor steady with the flywheel
Special Tool - Flywheel Holder: 57001–1410
Install the ratchet [B].
Torque - Left Balancer Gear Bolt [C]: 85 N·m (8.7 kgf·m, 63
Alternator Rotor Bolt [D]: 78 N·m (8.0 kgf·m, 57
Install the following in the engine right side.
Camshaft Chain [A] and Chain Guides [B]
Non-permanent Locking Agent -
Camshaft Chain Guide Bolts
Torque - Camshaft Chain Guide Bolts: 11 N·m (1.1 kgf·m,