8-6 ENGINE REMOVAL/INSTALLATION
Snap-on Clamps [A] (pry open)
Radiator Fan Motor Connector [B]
Rear Brake Light Switch Connector [C]
Spark Plug Leads [D]
Front and Rear Exhaust Pipes [E] (see Engine Top End
Shift Pedal (see Crankshaft/Transmission chapter)
Alternator Outer Cover (see Electrical System chapter)
Speed Sensor Connector [A]
Starter Motor Terminal
Alternator Connector [B]
Crankshaft Sensor Lead Connector [C]
Oil Pressure/Neutral Switch Connector [D]
Regulator/Rectifier Connector [E]
Sidestand Switch Connector [F]
Clutch Slave Cylinder [G]
Clutch Hose [H] (from the holder)
Unscrew the bolts [A] and remove the horn [B].
Remove the mounting bolt [C].
Lift up the radiator to clear the stoppers.
Remove the radiator.
Do not touch the radiator core. This could damage
the radiator fins, resulting in loss of cooling effi-
Water Hose [A] on Front Cylinder Head
Water Hose [B] on Rear Cylinder Head
Disconnect the engine ground terminal [A].