Clutch Cover Removal
Raise the rear wheel off the ground.
Special Tools - Jack: 57001–1238
Attachment Jack: 57001–1398
Drain the engine oil (see Periodic Maintenance chapter).
Support the engine with a suitable stand [A].
Put a plank [B] onto the stand.
Front Exhaust Pipe [A] (see Engine Top End chapter)
Downtube [B] (see Frame chapter, but remove the down-
tube with the right footpeg and rear master cylinder left
Unscrew the eighteen cover bolts [A].
Using the pry points [B], take the cover [C] off the
Do not remove the damper cover [D].
Use an air impact wrench for removal of the clutch hub
Remove the clutch cover (see Clutch Cover Removal).
Remove the retaining ring [A] using a cutout portion [C],
and take the operating plate [B] out of the clutch assem-
Screw Driver [D]
Spring Plate Pusher [B]