Fuel Tank Removal
Gasoline is extremely flammable and can be explo-
sive under certain conditions. Make sure the area
is well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
light. Do not smoke. Turn the ignition switch OFF
and disconnect the battery (–) terminal.
To avoid fire, do not remove the fuel tank when the
engine is still hot. Wait until it cools down.
To make fuel spillage minimum, draw the fuel out
from the fuel tank with a pump as much as possible
when the engine is cold.
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
Turn both ignition switch, and engine stop switch OFF.
Wait until the engine cools down.
Open the fuel tank cap [A] to lower the pressure in the
During tank removal, keep the tank cap open to release
pressure in the tank. This makes fuel spillage less.
Draw the fuel out from the fuel tank with a commercially
available electric pump [A].
Use a soft plastic hose [B] as a pump inlet hose in order
to insert the hose smoothly.
Put the hose through the fill opening [C] into one side of
the tank bottom and draw the fuel out.
Draw the fuel from the other side of the tank bottom in the
The fuel could not be removed completely from the
fuel tank. Be careful for remained fuel spillage.
Pull the ignition switch key [A] out.
Remove the Allen bolt [B], pull the indicator unit [C] back-
ward a little, and take it off from the fuel tank.
FUEL SYSTEM (DFI) 3-103