Throttle Body Assy
Apply a thin coating of grease to the throttle cable upper
Install the upper ends of the throttle cables in the grip.
Fit the projection [A] of the right switch housing into the
hole [B] of the handlebar (front view).
Turn the throttle grip and make sure that the throttle valves
move smoothly and return by spring force.
Check the throttle grip free play (see Throttle Grip Free
Play Inspection in the Periodic Maintenance chapter).
Operation with an incorrectly routed cable could re-
sult in an unsafe riding condition.
Fit the fuel hose joint #2 [A] onto the pipe (for delivery
joint) until the joint clicks [B].
Insert the hose joint straight along the pipe.
Push and pull [A] the fuel hose joint #2 [B] back and
forth more than two times and make sure it is locked and
doesn't come off. When the fuel hose joint #2 is correctly
installed, it should slide on the delivery pipe about 5 mm
Make sure the fuel hose joint is installed correctly
on the delivery pipe by sliding the joint, or the fuel
Install the fuel tank and the air cleaner housing (see this
Throttle Body Assy Disassembly/Assembly
Remove the throttle assy (see this chapter).
Unscrew two bolts [A], and pull out the ISC pipe #1 [B],
and ISC pipe #2 [C] from the hoses [D].
Bottom View [E]
FUEL SYSTEM (DFI) 3-97