3-74 FUEL SYSTEM (DFI)
Fuel Pump (Service Code 45)
Fuel Pump Installation
Clean the pump screen (see Pump Filter Cleaning).
Remove dirt or dust from the fuel pump by lightly applying
Replace the fuel pump gasket with a new one.
Install a new pump gasket [A] with its tab [B] facing back
and right [D] (top view).
Install the fuel pump [A] into the fuel tank [B] in the order
Check that the fuel pump terminals are in place.
Pump Motor BK/W (−) Lead [A]
Pump Motor W/R (+) Lead [B]
Fuel Reserve Switch R/BK (+) Lead [C]
Fuel Reserve Switch BK/Y (−) Lead [D]
Apply a non-permanent locking agent to the threads of
the fuel pump bolts.
Tighten the fuel pump bolts to a snug fit following the tight-
ening sequence shown.
Following the tightening sequence, tighten the pump bolts
to the specified torque.
Non-permanent Locking Agent -
Fuel Pump Bolts
Torque - Fuel Pump Bolts: 6.9 N·m (0.70 kgf·m, 61 in·lb)
Tighten the pump bolts again to check the tightness in the