Black & Decker BRVA425B00 Manual page 11

Setting Cleaning Schedule
Press button on Remote Control, and
then the hour section begins to Hash in the
Cleaning Schedule display setting window.
Note:When setting Cleaning Schedule,ensure the time on Remote Control is correct.
Cancel the Cleaning Schedule
Press and hold button approximately 4 seconds on Remote Control, the Robot
will "BEEP" when the Cleaning Schedule process cancel completed.
2.4 Use The Boundary Strip
With the Boundary Strip, you can keep Robot away from any area or item you do not want Robot to clean. Robot will
recognize the Boundary Strip and will not cross into the blocked-off area.
Identify the area or item you do not want Robot to get close to.
If necessary, use scissors to cut the Boundary Strip to a shorter length.
Be sure to correctly measure the length before cutting.
10
Press or button to select the desired
figures. Press the or button to select
the minute or hour section.
(Original instructions)
And then press the
will "BEEP" when the Cleaning Schedule
setting completed.
ENGLISH
button. the Robot
11