Hp (Tru64 5.1X) Servers And Workstations; Determining Attached Devices; What Next - HP LTO-4 Technical Reference Manual

4

HP (Tru64 5.1x) servers and workstations

NOTE:
Only SCSI drives are supported on Alpha Server systems.

Determining attached devices

After connecting the tape drive to your system, boot TRU64 and check for the presence of the new
tape device. Execute the following commands
# hwmgr -scan scsi
hwmgr: Scan request successfully initiated
# hwmgr -v d
HWID: Device Name
--------------------------------------------------------------------
4: /dev/dmapi/dmapi
5: /dev/scp_scsi
6: /dev/kevm
149: /dev/disk/dsk0c
150: /dev/disk/dsk1c
151: /dev/disk/cdrom0c
152: /dev/random
153: /dev/urandom
237: /dev/ntape/tape0

What next?

Once device files have been created, you should confirm that your new tape drive is working
properly. Please consult your Tru64 operating system documentation and
instructions on testing your installation.
HP LTO Ultrium 4 drives technical reference manual, volume 5: UNIX, Linux and OpenVMS configuration guide
Mfg Model
COMPAQ BD03685A24
COMPAQ BD03664553
TEAC CD-W216E
HP Ultrium 4-SCSI
Location
bus-2-targ-0-lun-0
bus-2-targ-1-lun-0
bus-3-targ-0-lun-0
bus-1-targ-3-lun-0
Chapter 8 on page 37 for
21