Changing The Micro-Tilter/Ultra-Micro-'Rlter; Motor Protection Filter - Aeg Vamfyr 731 I Electronic Diamant Operating Instructions Manual

Changing the mtcro-fflterAiHra-mlcro-flllar
Switch off and pull out the mains plug before changing the micro-filter.
Changing the micro-filter/ultra-micro-filter is necessary:
For appliancee wKh no mIcro-flHar Indicator
- when the dustbag full indicator
lights up,even whenaclean dustbag has been inserted,with the appliance switched
on, hold ^e head/nozzle upwards or the floor,it ihelight remains on,this indicates
the micro-fliter should be changed. We recommend changing the micro-filter virith
every fifth bag.
For appliances with miero-fiMer Indicator
- this comes op.
Thecaasotiocanbeopened by pressing the micro-
fllterbuttoaTake oulthe cassette in.the direction of
the arrow and emp^ the micro-filter over a dustbin
- this avoids you touching the dirty micro-filter.
Insert the new micro-filter into the cassette as
shown in the illu^ration, push it back in parallel to
the floor, and snap the cover shut.
Motor protection filter
The motor protection filter is a permahent filler and does not have to be changed
regularly. Exception: if it has been damaged. See "What to do if...".
Cleaning
i The cleaner housing and dustbag compartment can be cleaned with a damp cloth
3 andthenwiped dry with asoftcloth.Donoluseany^>raEive6orsolvents. The under¬
side of the cleaner head can be cleaned with the crevice nozzle from time to time.
25