Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this transformer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement...
Safety Information Proper mounting, wiring, grounding and servicing. WARNING: Make sure there is no wire insulation under the clamping plate. The secondary wiring is intended for shallow burial (less than 6 in. (152 mm).) Risk of fire, do not place insulation under terminal plate. WARNING: Do not coil the cable around the Check connection after installation.
Warranty WHAT IS COVERED The manufacturer warrants this transformer to be free from defects in materials and workmanship for a period of two (2) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service.
Installation Connecting the Cable to the Preparing the Cable Transformer □ □ Being careful when splitting NOT to expose the copper Lay the transformer on a flat, stable surface and insert the wire, remove the landscape wire insulation 1/2 in. from stripped end of one wire under the terminal clamping plate both wires and twist ends.
Page 9
Installation (continued) Placing the Fixtures and Routing the Attaching Your Fixtures Cable □ □ Lay your fixtures (not included) out where you want to Turn the transformer on. Attach your fixtures to the cable to locate them. Be sure they do not exceed the 60-watt rating using cable connectors as shown.
Page 10
Installation (continued) Mounting the Transformer Mounting the Photocell □ □ To mount directly to a wall surface use the included screws Mount the photocell (B) bracket on a wall or other solid (AA) as shown, suitable for mounting within 12 in. to 48 in. surface with the screws (BB) provided.
Operation ON AT DUSK/OFF AT DAWN (Factory ON AT DUSK /RUN TIME default setting) □ □ In this mode, the landscape lights will automatically come In this mode, the landscape lights will automatically turn on on at dusk and turn off at dawn. at dusk and off after the set time (hrs).
Page 12
Operation (continued) Screen Saver Standby Function Power-off Memory Function □ □ No matter in what mode, with any operation in 30 seconds When the product is in normal use and after a power outage, of the UP and DOWN arrow button, the LED indicator light the product would maintain the before work mode when it and screen would off and the transformer would enter the restores power supply.
Troubleshooting Guide Problem Probable Cause Check that the transformer power is on. All of the lights fail to work Check if there is a loose connection at the transformer screw terminal with the cable. Check that the power switch is not in an OFF setting. ...
Cable Selection Chart 12 VOLT Cable Length Total Fixture Wattage 0 – 50 ft. 51 – 100 ft. 101 – 150 ft. 0 – 60 Watts 16 AWG 16 AWG 14 AWG 61 – 120 Watts 16 AWG 14 AWG 12 AWG 121 –...
Page 16
HAMPTON BAY ® Questions, problems missing parts? Before returning to the store,call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON(1-855-434-2678) HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the ER-60-1215-AL and is the answer not in the manual?
Questions and answers