Adding Effects To Voices Played On The Keyboard - Yamaha Clavinova CVP-307 Owner's Manual

Adding Effects to Voices Played on the Keyboard

You can use a pedal to turn the
Harmony/Echo effects on and off
(page 186).
Portamento:
Portamento is a function that cre-
ates a smooth transition in pitch
from the first note played on the
keyboard to the next. The porta-
mento time (the pitch transition
time) can be set via the MIXING
CONSOLE display (page 84).
DSP:
Stands for Digital Signal Proces-
sor (or Processing). DSP changes
and enhances the audio signal in
the digital realm to produce a
wide range of effects.
80 CVP-309/307 Owner's Manual
Adding Effects to Voices Played on
the Keyboard
The CVP features a sophisticated multi-processor effect system which can add
extraordinary depth and expression to your sound.
1
Select the desired part for which you want to add effects by pressing
one of the PART SELECT buttons.
2
Press the [VOICE EFFECT] button to call up the VOICE EFFECT display.
1
3
Use the buttons at the lower part of the display to apply effects to the
Voices.
Effect Parameters
HARMONY/ECHO The Harmony/Echo types are applied to the right-hand Voices (page 81).
MONO/POLY This determines whether the part's Voice is played monophonically
(only one note at a time) or polyphonically. Using the MONO mode
lets you play single, lead sounds (such as brass instruments) more realis-
tically. It also lets you expressively control the Portamento effect
(depending on the selected Voice) by playing legato.
DSP/DSP VARIA- With the digital effects built into the Clavinova, you can add ambience
TION and depth to your music in a variety of ways—such as adding reverb
that makes you sound like you are playing in a concert hall.
• The DSP switch is used to turn the DSP (Digital Signal Processor)
effect on or off for the currently selected keyboard part.
• The DSP Variation switch is used to change between variations of the
DSP effect. You could use this while you play, for example, to change
the rotating speed (slow/fast) of the rotary speaker effect.
Selecting the Harmony/Echo type
You can select the desired Harmony/Echo effect from a variety of types.
In order to make the type you've selected here effective, set HARMONY/ECHO to
On in the display shown in step 2 above.
1
Call up the operation display.
[FUNCTION] → [F] HARMONY/ECHO
2
Use the [1 π † ]–[3 π
π π † †
π †
(page 81).
3
Use the [4 π † ]–[8 π
π π π † † †
tings (page 82).
The available settings differ depending on the Harmony/Echo type.
2
† ] buttons to select the Harmony/Echo type
π † π †
π †
† ] buttons to select various Harmony/Echo set-
π † π π † †